Christy Bluing Salts
- FROM SMITH GUN, INC.
This is NOT a new product! It IS a bluing
salts developed by Mr. Christy with the help of several chemists in 1935,
and has been used continually by us since that time. There is no guess
work, nor is there any doubt as to the results with these salts. They work
at temperatures of 285 - 315 degrees Fahrenheit and give a rich, deep lasting
blue when used at the proper temperature. When conditions are correct,
these salts will do the actual bluing in twenty (20) seconds to two (2)
minutes.
GREASY HANDS CAN BE FORGOTTEN! We have deliberately
rubbed oil on a gun barrel to demonstrate that it will not restrict the
bluing process. Although in time, oil will contaminate these salts.
The CHRISTY BLUING SALTS were developed to blue
guns, and will NOT blue: cast iron, stainless steel,
or non-ferrous metals. They WILL do a beautiful
job on practically all steel used in the manufacture of guns, including nickel
steel. It does take longer to blue nickel steel parts due to the composition
of the metal. It will NOT blue stainless steel.
A thermometer will allow you to know when the correct temperature has been reached
and the metal has begun the bluing process. If bluing has not begun, you will
need to add more water OR salts.
WATER is used to lower the temperature. TEMPERATURE can
be raised by: (1) evaporating the solution by boiling, or (2) adding more
salts.
These salts WILL NOT have to be thrown away, UNLESS contaminated
with aluminum, brass, copper, etc. It is necessary to add more salts from time
to time to replace loss due to the small amounts left on parts when they are
removed from the solution.
CHRISTY BLUING SALTS are furnished to you
in "brick" form. The "bricks" weigh approximately ten (10) to fifteen (15)
pounds. THERE IS NO CYANIDE OR OTHER POISONS USED
IN THESE SALTS. THE SALTS ARE EXTREMELY EASY TO USE. To the weight
of these salts you add equal amounts of water by WEIGHT.
EXAMPLE: 15 pounts of salts + 15 pounds of water.
BLUING SALTS PRICES ARE DETERMINED BY WEIGHT IN WEIGHT
GROUPS
0-15 LBS.
16-30 LBS.
31-60 LBS.
61 & UP LBS.
We also manufacture PARKERIZING SOLUTION with the same high quality as our bluing
salts....PRICED PER ONE QUART.
WE ALSO SELL:
LEA COMPOUNDS:
C - Grit
Grey Stick (grease stick)
Learock (green stick)
10" x 1/4"
We also COLOR CASE HARDEN. This is an actual case hardening process (an actual heat treating process). It HARDENS AND COLORS parts.Shipping, handling, & hazardous
materials fees must be added to prices.
ALL PRICES ARE SUBJECT
TO CHANGE WITHOUT NOTICE. E-MAIL FOR
QUOTE